Integrate all SpotOn features on your existing professional or Enterprise WiFi network
1. Integration Box Switch
2. UTP cable
3. Power adapter
There are two ways to install the Integration Box Switch. Both methods are described below. Please consider what method works best for your current setup
All VLAN tagged and untagged traffic is passed through to all other ports, functioning like a switch. By default WAN interface is set as VLAN untagged. But it can be configured as VLAN tagged with specific VLAN tag. The guest network is also present on every port on a preset VLAN.
Please let SpotOn know what VLAN tag you will use. This is needed before configuration of the device
Plug an internet cable coming from your VLAN aware switch
Untagged or specific VLAN tagged network
must have internet access. This can be your regular LAN or a segregated network.
- The
Hybrid switch has firewall rules to prevent guests from accessing your LAN.
- Preset
VLAN for guest network must be present on this port and must be connected all the
way to the AP’s.
- Other ports can be used a trunk ports or normal LAN ports.
Plug the power adapter into the Integration Box Switch
Wait five minutes
Connect with your new social WiFi network and view statistics on your own SpotOn Dashboard!
Tip: Make sure to disable your old WiFi network and paste the supplied stickers onto your windows.
Plug an internet cable coming from your modem
Connect other ports with VLAN aware access points. This way you don’t need a VLAN aware switch, as long as the number of accesspoints are not exceeding the number of available ports.
Plug the power adapter into the Integration Box Switch
Wait five minutes
Connect with your new social WiFi network and view statistics on your own SpotOn Dashboard!
Tip: Make sure to disable your old WiFi network and paste the supplied stickers onto your windows.