fbpx

Help Center

Ruckus Smartzone
Goal

This guide will show you how to configure Ruckus Smartzone for SpotOn WiFi.
 

  • Contact SpotOn for a new [CUSTOMER_ID] and replace this in the logon url and NAS ID further in this document
  • Go to Configuration → AP Zones
  • Create a new zone or select an existing one
  • Go to AP Zones → AAA
  • Click on ‘Create New’ and enter the following details:

 
Name guest-wifi-auth
Type RADIUS
Backup RADIUS [ ] Enable secondary server
IP Address 94.124.94.160
Port 1812
Shared Secret: [email protected]
Confirm Secret: [email protected]
 

    • Click OK
  • Click on ‘Create New’ and enter the following details

 
Name guest-wifi-acct
Type RADIUS Accounting
Backup RADIUS [ ] Enable secondary server
IP Address 94.124.94.160
Port 1813
Shared Secret: [email protected]
Confirm Secret: [email protected]
 

  • Click OK
  • Go to Hotspot (WISPr)
  • Click ‘Create New’ and enter the following details:

 
Portal Name guest-wifi
Smart Client Support none
Logon URL (x) External
Redirect unauthenticated user to the URL for authentication https://portal.spotonwifi.com/auth/vendor/[CUSTOMER_ID]/ruckus
Redirected MAC Format AA:BB:CC:DD:EE:FF
After user is authenticated (x) Redirect to the following URL URL of your choice
Session Timeout 1440
Grace Period 60
WISPr Location ID [CUSTOMER_ID]
 
Required domains

 	portal.spotonwifi.nl
 	portal.spotonwifi.com
 	*.facebook.com
 	*.fbcdn.net
 	*.akamaihd.net
 	*.facebook.net
 	*.google-analytics.com
 	accounts.google.com
 	*.gstatic.com
 	www.google.com
 	lh3.googleusercontent.com
 	googlehosted.l.googleusercontent.com
 	accounts.youtube.com
 	www3.l.google.com
 	notifications.google.com
 	plus.l.google.com
 	placehold.it
 	placeholdit.imgix.net
 	fonts.googleapis.com
 	scontent.xx.fbcdn.net
 	amp.cloudflare.com
 	hit.uptrendsdata.com
 	twitter.com
 	*.twitter.com
 	*.twimg.com
 	*.instagram.com
 	ajax.cloudflare.com
 	*.segment.com
 	*.hotjar.com

 
Blacklist

 	clients3.google.com
 	connectivitycheck.gstatic.com

 

  • Click ‘OK’ to save these settings
  • Go to ‘WLAN’ and select an existing or create a new WLAN configuration
  • Enter the following details:

 
Name guest-wifi
SSID Enter any name of your choice
Authentication Type Hotspot (WISPr)
Method MAC Address
Use user-defined text as authentication password (default is device MAC address) [ ] leave unchecked
MAC Address Format AA:BB:CC:DD:EE:FF
Method None
Hotspot (WISPr) Portal guest-wifi
Authentication Service [ ] use the controller as proxy: guest-wifi-auth
Accounting [ ] use the controller as proxy: guest-wifi-acct, Send interim update every 10 Minutes
NAS ID User-defined: [CUSTOMER_ID]
Called STA ID AP MAC

Can't find your answer?