fbpx

Help Center

Open Mesh
Purpose

This guide shows how to configure an Open Mesh Access Point for SpotOn.

 

Prerequisites

Log in to your CloudTrax account. It is recommended to update your device firmware to the latest available version.

 

Network Setup

To setup your access point go to Configure and select an SSID. Enable it and set a name for it:

1 ssid 300x124 - Open Mesh

Select its authentication settings (Open or WPA Pre-shared key/Enterprise). Under Captive Portal enable Splash Page:

2 captive 300x177 - Open Mesh

Select “Hosted remotely” as the Splash page type. Splash page URL and secret should be as follows:
 

Splash page URL: https://portal.spotonwifi.com/auth/vendor/[CUSTOM ID]/open_mesh
Splash page secret: wo8UQBv2emoBsyrQKqs6fMFmN3wWhTbu

 
Note: SpotOn support can provide you your CUSTOM ID.

Select RADIUS as the Splash page authentication type and enter the following parameters:
 

Server address 1: 94.124.94.160
Server secret: [email protected]

 
“Enable Failsafe Mode” should be disabled and “Block unauthenticated users” should be enabled:

3 300x94 - Open Mesh

Under walled garden enter the following:
 

spotonwifi.com
facebook.com
facebook.net
akamaihd.net
fbcdn.net
atdmt.com
fbsbx.com
google.com
googleapis.com
gstatic.com
ajax.cloudflare.com 
placehold.it
placeholdit.imgix.net 
amp.cloudflare.com 
twitter.com
twimg.com
abs.twitter.com
instagram.com

 
DNS intercept option should be enabled:

4 dns 300x30 - Open Mesh

Press Save Changes to push the configuration to the Open Mesh AP. The configuration is now complete.

Can't find your answer?